Our Chemicals
Browse our range of industrial and specialty chemicals
Showing 361–380 of 392 products
Thymol
Thymol (CAS 89-83-8, C10H14O) is a white crystalline phenol with a pungent odour and a literature melting point of 48-51 °C, used as an aroma and flavour material in daily-chemical products.
Vanillin
Vanillin (CAS 121-33-5) at 99% by HPLC: a white powder that carries the characteristic sweet odour and taste of vanilla, used to flavour foods and beverages and to round off perfumes, creams and household products.
Boron Carbide
Boron carbide (CAS 12069-32-8), a black ceramic powder with Mohs hardness 9.36 and density 2.52 g/cm³, graded by F-grit size from F180 to F800. An abrasive for lapping and polishing hard alloys, sapphire and gemstones, and a material for nozzles and wear parts.
Boron Powder
Elemental boron powder (CAS 7440-42-8), amorphous or crystalline, in grades from 85.0% to 99% boron and in particle sizes of 1-3 µm or 10-20 µm. Used in special alloy steels, as a degassing agent for molten steel and to make boron compounds.
Calcium Fluoride
Calcium fluoride (CAS 7789-75-5) is the raw material behind essentially every fluorine compound in commerce. Acid grade fluorspar at over 97 percent CaF2 is converted to hydrogen fluoride, and everything fluorinated follows from that.
Hexagonal Boron Nitride (h-BN)
Hexagonal boron nitride (h-BN, CAS 10043-11-5), a white platelet powder of 99% BN purity and 2.29 g/cm³ density, listed in five grades from 1–2 μm to 15–20 μm for release agents, solid lubricants, refractories and fillers.
Magnesium Fluoride (MgF2)
Magnesium fluoride (CAS 7783-40-6) as a 99% nano powder in 20 nm and 50-100 nm sizes, and in conventional grades of 95.0% to 99.5% MgF2 content. Used in anti-reflective optical coatings, infrared optics, special ceramics and as a flux.
Titanium Diboride (TiB2)
Titanium diboride (CAS 12045-63-5), a hard, electrically conductive boride ceramic at 98.5% TiB2 minimum with oxygen held to 0.4%. Made into evaporation boats for vacuum coating, cutting tools, wear parts and cathode coatings for aluminium cells.
Zirconium Dioxide (Zirconia)
Zirconium dioxide (zirconia, ZrO2) in industrial grade, a white powder supplied in 20 kg drums, for ceramic pigments, capacitors, structural ceramics and refractories. Assay, stabiliser and particle size are settled on enquiry.
Fluorite (Fluorspar)
Fluorite, traded as fluorspar, is the mineral form of calcium fluoride. It is sold in two grades that are not interchangeable: acid grade above 97 percent for chemical conversion, metallurgical grade for steel fluxing.
Perlite Ore Sand
Perlite ore is a volcanic glass containing bound water. Heated rapidly past 850 degrees Celsius that water flashes to steam and expands the softened glass up to twenty times, producing a lightweight cellular particle.
Plasticiser
Plasticiser is a class rather than a single product, covering phthalates, terephthalates, adipates, trimellitates and bio-based esters. Selection is a trade-off between efficiency, permanence, cold flexibility and regulatory status.
Sulfur
Sulfur (CAS 7704-34-9) is almost entirely a recovered by-product now, stripped from natural gas and crude oil to meet emissions law. Around 85 percent of world output goes straight into sulphuric acid.
MEA - Monoethanolamine
Monoethanolamine, MEA (CAS 141-43-5), is the benchmark solvent for post-combustion carbon capture. It reacts chemically with carbon dioxide at low partial pressure, where physical solvents cannot absorb enough to be useful.
DEA - Diethanolamine
Diethanolamine, DEA (CAS 111-42-2), is a secondary amine used in gas treating and as a surfactant intermediate. Its position in personal care has narrowed sharply because secondary amines can form nitrosamines.
Propylene Carbonate (PC)
Propylene carbonate (CAS 108-32-7, EINECS 203-572-1) is a polar aprotic solvent with an unusually high dielectric constant. It is readily biodegradable and low in toxicity, which is why it displaces solvents such as NMP.
DOTP - Dioctyl Terephthalate
Dioctyl terephthalate, DOTP (CAS 6422-86-2), is the direct non-phthalate replacement for DOP. It is chemically an isomer, differing only in where the two ester groups sit on the benzene ring, but it is not a phthalate.
Sericin Powder
Sericin (CAS 60650-88-6) is the gum protein that binds silk fibres together in the cocoon, and it is removed during degumming. Recovering it turns what was an effluent stream into a hydrophilic cosmetic protein.
Silk Amino Acids
Silk amino acids (CAS 96690-41-4, INCI Hydrolyzed Silk) are silk protein broken down completely to free amino acids. At the lowest molecular weight of the silk range, they act as humectants rather than film formers.
Silk Peptide
Silk peptide (CAS 96690-41-4, INCI Hydrolyzed Silk) is silk protein hydrolysed only partway, leaving short chains rather than free amino acids. That intermediate size is what allows it to form a film while staying soluble.