Our Chemicals
Browse our range of industrial and specialty chemicals
Showing 221–240 of 356 products
DPE - Dipropylene Glycol Monoethyl Ether
Dipropylene glycol monoethyl ether, DPE (CAS 30025-38-8), pairs a two-unit glycol backbone with an ethyl cap. It is a high-boiling, low-odour, water-miscible solvent widely accepted in consumer cleaning products.
PNB - Propylene Glycol Monobutyl Ether
Propylene glycol monobutyl ether, PnB (CAS 5131-66-8), is the strongest solvent in the single-unit propylene series. Its slow evaporation makes it a tail solvent, staying in the film to aid flow after faster solvents have gone.
DPNB - Dipropylene Glycol Monobutyl Ether
Dipropylene glycol monobutyl ether, DPnB (CAS 29911-28-2), is among the most widely specified coalescents in architectural paint. Its strong polymer affinity and very slow evaporation make it effective at low addition.
PNP - Propylene Glycol Monopropyl Ether
Propylene glycol monopropyl ether, PnP (CAS 1569-01-3), combines full water miscibility with strong solvency for oils and greases. That pairing makes it a standard coupling solvent in water-based cleaning formulations.
DPNP - Dipropylene Glycol Monopropyl Ether
Dipropylene glycol monopropyl ether, DPnP (CAS 29911-27-1), combines a two-unit backbone with a propyl cap. It is a slow-evaporating coalescent that stays in a latex film long enough to complete polymer fusion.
DPDM - Dipropylene Glycol Dimethyl Ether
Dipropylene glycol dimethyl ether, DPDM, is capped with methyl groups at both ends, so it carries no hydroxyl. It is a high-boiling aprotic solvent used where an active hydrogen would interfere with the chemistry.
PMA - Propylene Glycol Monomethyl Ether Acetate
Propylene glycol monomethyl ether acetate, PMA or PGMEA (CAS 108-65-6), is the standard solvent of the semiconductor industry. It is the carrier and developer solvent for photoresists, where purity is specified in parts per billion.
2,2,4-Trimethyl-1,3-Pentanediol Monoisobutyrate
2,2,4-Trimethyl-1,3-pentanediol monoisobutyrate (CAS 25265-77-4) is the standard coalescent for latex paint. It has a free hydroxyl at one end and an ester at the other, which is what gives it its balance of water and polymer affinity.
2,2,4-Trimethyl-1,3-Pentanediol Diisobutyrate
2,2,4-Trimethyl-1,3-pentanediol diisobutyrate (CAS 6846-50-0) is the di-ester version, with both hydroxyls capped. Having no free hydroxyl it does not evaporate out, so it acts as a permanent plasticiser rather than a coalescent.
Phosphoric Acid
Phosphoric acid (CAS 7664-38-2) is the parent compound of every phosphate salt in the catalogue. A triprotic acid supplied at 75 to 85 percent, it is used directly for metal phosphating, descaling and as a rust converter.
Trisodium Phosphate
Trisodium phosphate, TSP (CAS 7601-54-9), is the fully neutralised sodium phosphate and the most alkaline of the series, dissolving to around pH 12. It is a powerful degreaser and the traditional pre-paint surface cleaner.
Sodium Hexametaphosphate (SHMP)
Sodium hexametaphosphate, SHMP (CAS 10124-56-8), is a glassy polyphosphate that sequesters calcium and magnesium extremely strongly. It is the standard threshold scale inhibitor in cooling water and the deflocculant in ceramic slips.
Dipotassium Hydrogen Phosphate (DKP)
Dipotassium hydrogen phosphate, DKP (CAS 7758-11-4), is the alkaline potassium phosphate. In industry it supplies both potassium and phosphorus in a single soluble salt, which suits fertigation and fermentation media.
Potassium Dihydrogen Phosphate (MKP)
Potassium dihydrogen phosphate, MKP (CAS 7778-77-0), is the 0-52-34 soluble fertiliser, supplying phosphorus and potassium with no nitrogen at all. That makes it the standard choice for flowering and fruiting stages.
Disodium Hydrogen Phosphate (DSP)
Disodium hydrogen phosphate, DSP (CAS 7558-79-4), is the middle sodium phosphate, alkaline at around pH 9. In industry it is a buffer, a detergent builder and a boiler water treatment that prevents hard scale.
Sodium Dihydrogen Phosphate (MSP)
Sodium dihydrogen phosphate, MSP (CAS 7558-80-7), is the acidic sodium phosphate, dissolving to around pH 4.5. It is the acid half of the phosphate buffer pair and a mild acidulant for industrial processes.
Tetrasodium Pyrophosphate (TSPP)
Tetrasodium pyrophosphate, TSPP (CAS 7722-88-5), is the simplest condensed phosphate, formed by joining two phosphate units. Alkaline and strongly dispersing, it is used as a detergent builder and a drilling mud thinner.
Monoammonium Phosphate (MAP)
Monoammonium phosphate, MAP (CAS 7722-76-1), is the 11-52-0 fertiliser grade with the highest phosphorus content of the common straight phosphates. It is also the active powder in ABC dry chemical fire extinguishers.
Diammonium Phosphate (DAP)
Diammonium phosphate, DAP (CAS 7783-28-0), is the 18-46-0 fertiliser and the most traded phosphate fertiliser in the world. Unlike MAP it dissolves to an alkaline solution, which matters on high-pH soils.
Dicalcium Phosphate (DCP)
Dicalcium phosphate, DCP (CAS 7757-93-9), is a white insoluble powder supplying calcium and phosphorus in roughly the ratio bone uses them. Its largest market is animal feed, where it is the standard mineral supplement.