Our Chemicals
Browse our range of industrial and specialty chemicals
Showing 59 products
General Purpose Starch-Filled PP/PE Foaming Resin
A powder compound carrying 30-70% renewable starch in a polyolefin matrix, supplied for water-based foamed sheet extrusion. It reduces fossil polymer content per tonne of sheet without changing the processing route.
Flame Retardant Starch-Filled PP/PE Foaming Resin
The flame-retardant grade of the starch-filled polyolefin foaming series, for foamed sheet that has to meet a burn specification. The FR package sits in the same 30-70% starch polyolefin base, so the line needs no rework.
High Elasticity Starch-Filled PP/PE Foaming Resin
The high-elasticity grade of the starch-filled polyolefin foaming series, formulated for foam that recovers after repeated compression rather than taking a permanent set. Starch loading is unchanged from the series.
Water-Soluble Loose Fill Peanut Compound (PBAT/Starch)
A biodegradable powder compound for producing water-soluble void-fill peanuts in-house, on the converter's own loose-fill foaming line. The finished peanuts dissolve in water, which is how the end user disposes of them.
Hydrophobic Loose Fill Peanut Compound (PBAT/Starch)
The moisture-resistant counterpart to the water-soluble loose fill compound, for void fill that must survive humidity or damp transit without collapsing. It runs on the same loose-fill foaming equipment.
Food Contact Flat Bag Compound (PLA/PBAT, FDA)
An FDA-compliant PLA/PBAT pellet compound for blowing biodegradable flat bags intended for direct food contact. It is formulated for film-grade melt strength and bubble stability on a standard blown film line.
T-Shirt and Vest Bag Compound (PLA/PBAT)
A cost-optimised PLA/PBAT pellet compound for high-volume biodegradable carrier bags, where unit cost governs the specification. It remains a fully biodegradable system and runs on standard blown film equipment.
Courier Bag Compound (PLA/PBAT, High Tear Strength)
A PLA/PBAT pellet compound formulated for tear resistance, for biodegradable courier and mailing bags that must survive an automated parcel network. It runs on standard blown film lines at mailing-bag gauges.
Food Cling Film Compound (PLA/PBAT, FDA)
An FDA-compliant blown film compound for biodegradable cling film, formulated for the cling and conformability that application depends on. It has to stretch over a container rim without tearing at a very thin gauge.
Agricultural Mulch Film Compound (UV Stabilised)
A UV-stabilised biodegradable compound for mulch film designed to be tilled into the soil at the end of the season instead of lifted and landfilled. The stabiliser package sets how long the film lasts in the field.
Pet Waste Bag Compound (High Toughness)
A high-toughness biodegradable blown film compound for pet waste bags, where a thin gauge must not fail in use. It is formulated for toughness and puncture resistance at low film thickness in a fully biodegradable system.
PLA/PBAT/Starch Ternary Blown Film Compound
A ternary pellet compound of PLA, PBAT and starch for general-purpose biodegradable blown film. The starch fraction lowers the resin cost and raises renewable content, at some cost in mechanical performance.
High Barrier Co-extrusion Film Compound (PLA/PBAT)
A PLA/PBAT pellet compound formulated for the barrier layer of a co-extruded biodegradable film structure. It is specified where shelf life depends on controlling moisture or oxygen transmission through the pack wall.
Heat Shrink Film Compound (PLA/PBAT)
A biodegradable PLA/PBAT pellet compound for blown shrink film, formulated to give controlled shrinkage in a heat tunnel. Shrink onset temperature and shrink ratio are set to fall within the window a standard tunnel runs.
Paper-Plastic Lamination Compound (PLA/PBAT)
A PBAT-based pellet compound with PLA for extrusion coating and lamination onto paper and board. It gives a moisture or grease barrier that does not make the substrate unrecyclable as conventional polyethylene coating does.
Ultra-Thin Water-Permeable Mulch Film Compound
A biodegradable pellet compound for very thin mulch film that lets applied water through to the soil rather than shedding it. It suits irrigation regimes that water over the film rather than through buried drip line.
Diaper Backsheet and Composite Film Compound (PLA/PBAT)
A PLA/PBAT pellet compound for the backsheet layer of absorbent hygiene products, where a soft, quiet, liquid-tight film is required. It is also formulated for the lamination step that bonds the film to the nonwoven outer.
Bubble Film and Bubble Mailer Compound (PLA/PBAT)
A blown film grade PLA/PBAT pellet compound for biodegradable bubble film and padded mailers, run on standard lines. It is formulated to survive bubble forming and then to hold air in the bubble over time.
Cutlery Injection Compound (PLA + Mineral Filler, FDA, 85C)
A mineral-filled PLA injection grade for disposable cutlery, rated to 85C so a fork does not soften in hot food. The filler adds the stiffness a knife needs to cut, and the compound is FDA compliant for food contact.
Disposable Cup, Bowl and Plate Injection Compound (FDA)
An FDA-compliant biodegradable injection grade for rigid disposable tableware, formulated for thin-wall flow across a large part. Where the item will hold hot food, the heat-resistant container grade should be specified instead.
Chopstick Injection Compound (FDA)
An FDA-compliant biodegradable injection grade for moulded chopsticks, formulated for the stiffness and surface finish a long, slender part requires. It is an alternative to both moulded polystyrene and single-use timber.
High Flow Injection Compound for Small Cases
A high-flow biodegradable injection grade for small precision housings and cases, where surface finish on a visible part is the governing requirement. It fills detailed cavities cleanly and needs no secondary finishing.
Cosmetic Bottle Blow Moulding Compound (FDA)
A biodegradable PLA/PBAT blow moulding grade for cosmetic and personal care bottles, formulated for the melt strength a hanging parison needs and for even wall distribution. It is supplied FDA compliant for contact applications.
Toothbrush Handle Injection Compound
A biodegradable PLA/PBAT injection grade for toothbrush handles and similar personal care bodies, supplied as a pellet compound. It is formulated for rigidity and moisture resistance in months of daily wet use.
Coffee Capsule Injection Compound (95C, FDA)
An FDA-compliant biodegradable injection grade rated to 95C, supplied as a heat-modified PLA pellet compound. It is made for single-serve coffee capsules that must hold their shape under pressurised hot water extraction.
Cold Use Food Container Injection Compound (PLA/PBAT, FDA)
An FDA-compliant PLA/PBAT injection grade for rigid cold-use food containers, such as chilled deli, salad and dessert packs. It is formulated for clarity, stiffness and impact resistance at refrigerated temperatures.
Hot Use Food Container Injection Compound (80C, Microwaveable, FDA)
An FDA-compliant biodegradable injection grade rated to 80C and microwaveable, supplied as a heat-modified PLA/PBAT pellet compound. It is for hot food containers and ready meal packs that are filled hot or reheated.
Nursery Pot and Tray Compound (Compostable)
A compostable PLA/PBAT compound for nursery pots and propagation trays, supplied as pellets for thermoforming or injection moulding. Its service life is matched to the crop cycle rather than left open-ended.
Fibre-Reinforced Flower Pot Compound
A natural-fibre reinforced biodegradable injection compound for decorative and retail flower pots, supplied as pellets. It gives both the stiffness a full pot needs and the matt, natural appearance retail buyers want.
Anti-Static Modified Compound (PLA/PBAT)
A PLA/PBAT compound carrying an anti-static modification, supplied as pellets for injection moulding and extrusion. It is for biodegradable components and packaging used around electronics or fine powders.
Flushable Hygiene Material Compound (PLA/PBAT)
A PLA/PBAT compound developed for flushable hygiene articles and dispersible nonwovens, supplied as pellets for extrusion and forming. It is formulated to disperse in a sewer system rather than persist as a fibrous mass.
Cold Use Lunch Box and Tray Thermoforming Compound (PLA/PBAT, FDA)
An FDA-compliant PLA/PBAT thermoforming grade for cold-use lunch boxes and food trays, supplied as a pellet compound for sheet extrusion. It is formulated for uniform sheet draw, without sagging or thin corners.
Hot Use Lunch Box and Tray Thermoforming Compound (80C, Microwaveable, FDA)
The heat-resistant thermoforming grade, rated to 80C and microwaveable, supplied as a heat-modified PLA/PBAT pellet compound for sheet extrusion. It is for hot food trays and reheatable ready meal packs.
Foamed Lunch Box Compound (PLA/PBAT)
A PLA/PBAT foaming grade supplied as pellets for foam extrusion and forming into lunch boxes and takeaway containers. It gives the insulation and low weight of expanded polystyrene in a biodegradable polymer.
Foamed Insert Tray Compound (PLA/PBAT)
A PLA/PBAT foaming grade for moulded insert trays that locate and protect a product inside its outer carton. It puts that insert into a biodegradable polymer in place of expanded polystyrene or vacuum-formed PVC.
Foamed Insulation Box Compound (PLA/PBAT/PBS)
A three-polymer PLA/PBAT/PBS foaming compound for insulated shipping boxes, supplied as pellets for foam extrusion and forming. It is for cold-chain deliveries that currently rely on expanded polystyrene.
Cold Drink Straw Compound (Pure PLA, FDA)
A pure PLA extrusion grade for thin-wall cold drink straw tube, supplied as a pellet compound and FDA compliant for food contact. It is a compostable alternative to polypropylene and to paper straws that soften.
Hot Drink Straw Compound (80C, FDA)
A heat-modified PLA extrusion grade rated to 80C for straws used in hot drinks, where an unmodified PLA straw would soften. It is supplied as a pellet compound, FDA compliant, and runs on the same tube line as the cold grade.
Paper Lamination Resin (PBAT-Based)
A PBAT-based resin for the extrusion lamination and coating of paper and board, laying down a compostable barrier layer in place of a polyethylene coating. It is supplied as a pellet compound for the buyer's line.
Flat Yarn and Woven Fabric Compound (PLA/PBAT)
A PLA/PBAT compound for extruding flat yarn and tape for woven biodegradable fabric, supplied as a pellet compound. It is intended for woven sacks, ground cover and similar agricultural textiles.
Foamed Cushioning Pellet Compound (PLA/PBAT)
A PLA/PBAT foaming grade for loose cushioning pellets, supplied as a pellet compound for foam extrusion. It is a biodegradable alternative to the expanded polyethylene and polypropylene cushioning it replaces.
Insulation Foam Board Compound (PLA/PBAT)
A PLA/PBAT foaming grade for extruded insulation foam board, supplied as a pellet compound for buyers who want a biodegradable panel in place of conventional foam. Thermal and compressive performance are set on the line.
Spunbond Nonwoven Compound (PLA/PBAT)
A PLA/PBAT compound for spunbond nonwoven production, supplied as a pellet compound and formulated to spin at fine filament diameters. It gives a biodegradable fabric for hygiene, medical and agricultural use.
Meltblown Nonwoven Compound (PBAT)
A PBAT compound for meltblown nonwoven production, supplied as a pellet compound at the very high melt flow the process demands. It gives the fine fibre structure used in filtration and absorbent layers.
Bi-Component Spinning Compound (PLA/PBAT)
A PLA/PBAT compound for bi-component fibre spinning, supplied as a pellet compound for sheath-core filament. Two polymers are spun into one filament so that bonding and strength come from the same fibre.
Wood Pulp Spunlace Nonwoven Compound (PBAT)
A PBAT compound for spunlace nonwoven combined with wood pulp, supplied as a pellet compound. It gives the soft, absorbent biodegradable fabric used for wet and dry wipes, cleaning cloths and personal care.
Agricultural Nonwoven Compound (PBAT)
A PBAT compound for agricultural nonwoven fabric such as crop covers and weed control, supplied as a pellet compound. It is designed to break down in the soil rather than be recovered at the end of a season.
Biodegradable Hot Melt Adhesive Compound (PBAT/PLA)
A PBAT/PLA compound for producing biodegradable hot melt adhesive, supplied as a pellet compound. It keeps the adhesive from compromising the compostability of the pack it is used to assemble and seal.
Biodegradable Pressure Sensitive Adhesive Compound (PBAT)
A PBAT-based pellet compound for producing biodegradable pressure sensitive adhesive for label stock and tape. It is intended for labels and tapes that travel into the waste stream with a compostable pack.
3D Printing Filament Compound (PLA, Natural and Coloured)
A PLA pellet compound formulated for extruding 1.75mm 3D printing filament on the buyer's own line, supplied natural or coloured. Melt behaviour is held consistent so diameter holds through a full spool.
Heat-Resistant 3D Printing Filament Compound (Modified PLA)
A heat-modified PLA compound, supplied as pellets for filament extrusion, producing prints that hold their shape at elevated temperature where standard PLA parts deform. The raised heat deflection takes PLA into functional use.
Food Contact 3D Printing Filament Compound (PLA, FDA)
An FDA-compliant PLA compound, supplied as pellets for filament extrusion, for printing articles that will contact food. It lets the filament producer document the material, which most 3D printing filament cannot.
Graphene-Enhanced Conductive Filament Compound (PLA/PBAT)
A graphene-loaded PLA/PBAT compound, supplied as pellets for extrusion into electrically conductive 3D printing filament. It is used where a printed part must carry a circuit, sense, shield or dissipate static.
Absorbable Surgical Suture Compound (PLA/PCL)
A high-purity medical grade PLA/PCL compound for manufacturing absorbable surgical sutures, supplied as a raw material to qualified medical device manufacturers. The ratio of the two polyesters sets the absorption profile.
Absorbable Bone Fixation Compound (PLA/PLGA)
A high-purity medical grade PLA/PLGA compound for absorbable bone screws and fixation devices, supplied as a raw material to qualified device manufacturers. The glycolide fraction sets the degradation rate.
Drug Delivery Carrier Compound (PLA)
A medical grade PLA compound, supplied as pellets, for controlled-release drug delivery carriers. It is supplied as a raw material to qualified pharmaceutical manufacturers, who develop the release profile themselves.
Medical Antimicrobial Film and Bag Compound (PLA/PBAT)
A medical grade PLA/PBAT compound carrying an antimicrobial modification, supplied as pellets for producing medical films and bags. The modification is compounded into the resin rather than coated onto the finished film.
Medical Wound Dressing Compound (PLA/PBAT Fibre Composite)
A medical grade PLA/PBAT fibre composite compound for wound dressing substrates, supplied as a raw material to qualified device manufacturers. The fibre structure of the dressing governs moisture balance at the wound bed.
Pineapple Leaf Fibre Reinforced Biocomposite Compound (PLA/PBAT)
A PLA/PBAT biocomposite reinforced with pineapple leaf fibre, an agricultural residue, supplied as pellets for injection moulding and extrusion. It is stiffer and stronger than the unfilled polymer and higher in renewable content.